PCB prototype printed board circuits en elektronica onderdelen

Free Shipping Gratis verzending /orders boven € 79,00

PCB Printed Circuit Boards

Componenten elektronica

5 Stuks - 4 layer PCB


€ 109,92
PCB Dikte
Selecteer printplaat dikte
Koper gewicht
Selecteer gewicht koper
PCB Grootte
Selecteer grootte printplaat
PCB kleur
Selecteer kleur
Oppervlakte afwerking
Selecteer afwerking oppervlakte
PCB Stencil
PCB Stencil
Panelizing
Panelizing
Upload the Gerber file must be packed into RAR or ZIP format
Max upload grote voor elke bestand is 1 MB
Max. aantal bestanden zijn : 5
Upload bestand


Upload the Gerber file must be packed into RAR or ZIP format

PCB Bestanden

Gerber Files Required:

The following files would be needed for the 4-layers PCB production:
Top layer: pcbname.GTL
inner layer 2: pcbname.GL2
inner layer 3: pcbname.GL3
Bottom layer: pcbname.GBL
Solder Stop Mask top: pcbname.GTS
Solder Stop Mask Bottom: pcbname.GBS
Silk Top: pcbname.GTO
Silk Bottom: pcbname.GBO
NC Drill: pcbname.TXT
Mechanical layer : pcbname.GML

 

Note:
  • The Gerber file must be RS-274x format, The format of the drill file can be Excellon
  • Board outline must be included at least in one layer if there isn't GML/GKO layer.
  • All the holes will be plated by default, if you need some holes not plated, please name the non-plated holes as pcb.name-NPTH.txt and leave a comment;
  • For one layer PCB, If you need the solder mask on the top and bottom side, please order it as 2 layer PCB and leave a comment '1 layer PCB with solder mask both side".

PCB Specificaties

The following files would be needed for the 4-layers PCB production:

Multi Layers 1-2-4
PCB Material  FR-4
Available Color Green, Red, Yellow, Blue, White, Black
Silk Screen  White, Black (For White Solder Mask only)
Maximum Size 45cm X 120cm
Minimum Qty 10pcs
Board Thickness 0.6mm,0.8mm, 1.0mm, 1.2mm, 1.6mm
Thickness Tolerance (t≥1.0mm) ± 10%
Thickness Tolerance (t<1.0mm) ± 0.1mm
Insulation Layer Thickness  0.075mm--5.00mm
Minimum PCB track  6mil (Recommend >8mil)
Minimum Track/Vias Space   6mil  (Recommend >8mil)
Minimum pads Space  8mil
Minimum silkscreen text size  32mil
Out Layer Copper Thickness  1oz(35um)
Inner Layer Copper Thickness  1oz(35um)
Drilling Hole (Mechanical) 0.3mm—6.35mm
Finish Hole (Mechanical) 0.8mm—6.35mm
Drill Diameter Tolerance (unplated) 0.05mm
Drill Diameter Tolerance (plated) 0.1mm
Outline Tolerance (Mechanical) ±0.20mm
Aspect Ratio 8:1
Solder Mask Type Photosensitive ink
SMT min Solder Mask Width 0.2mm
Min Solder Mask Clearance 0.2mm
Solder Mask Thickness 15um
Surface Finish HASL, HASL (Lead Free), ENIG.

 

Contact

Goose Electronics
Goosetrade

Duifkruid 203
4007 SW  TIEL

Informatie via email:
info@goosetrade.nl